Gable End Marquee

Gable End Marquee

$1,389.00$2,453.00

The design for this tent is derived from a known example of an 18th century German Officer’s tent. Although there are a few vague sketches from North America that show a tent that resembles this one in many ways, we have no documented evidence to tell us just how large the tent may have been. We have kept the correct proportions and offer this practical structure in a number of sizes.

The Gable End Marquee is an amalgamation of the best of both wall tents with it’s straight gable ends and marquees with the removable walls. The roof section can be erected alone for a canopied area or the walls hung between the interior and exterior valance. The “D” ring and snap hook wall suspension system allows the two doors to be located anywhere convenient. Details include full 34″ door panel overlap, mud flaps, and optional fancy trim valance.If you would like your Gable End Marquee to be manufactured with the13oz. Sunforger canvas add:20%.

Dimensions below are usual finished sizes. For those of you interested but intimidated by the longer ridge poles necessary, we offer pole sleeves of welded sheet metal to significantly reduce the length of your transportable load.

Extra Doors

All marquees and pavilions come with two doors standard. You can add 1 or 2 more doors.

Trim Style *

Sine Wave Castle Roman Wave No Trim

Trim Color *

White Linen Black Brown Tan (Heather) Rust Burgundy Red Pink Plum Navy Mediterranean Blue Sapphire (Slate Blue) Persian (Teal) Forest Green Alpine Green Green Sea Spray Yellow Concord (Purple)

Roof Vent

Segmented Mud Flaps

MUD FLAPS are standard on all walls. The standard width on the mud flap is 10″. Some vendors have requested we remove the mud flaps so as to allow walls to be more easily put up or taken down without moving poles, because on square and rectangular marquees the perimeter poles do rest on the mud flap. Some customers go with the segmented mud flaps if they want the protection and convenience. We are happy to do this.

None No Segmented Mud Flaps Add Segmented Mud Flaps +10.00%

Half-way ties on Walls

Vendors, families with toddlers, those who want more breeze but some privacy; there are plenty of people who might like to drop just the upper half of their walls, and ties at the half-way point make that possible.

Divider with Door

Flap on Marquee for seamless Awning attachment

This flap is sewn on to the front of your Marquee, and hides a velcro strip that attaches to your awning and adds weatherproofing and wind resistance when your awning is attached.

Stove Jack

Looking for a way to keep warm? We can install a silicon jack through which a stove pipe can exit your tent, enabling you to have a toasty warm wood stove right inside your tent. Please pick the diameter of desired stove jack.

Oval vs Circular for slanted surfaces

Stove jacks installed on slanted walls are usually oval in shape to allow for stove pipe to be straight up and down, not angled. If you would prefer a circular jack, your pipe will have to angled.

Please provide with a description of where you would like your stove jack placed. Height and which wall. Standard is 42″ off the ground.

Toggles on your Door

All doors on our tents come with tie closures, but we can substitute loops and wooden toggle closures.

Add height to your walls

Thicker than standard canvas

Some folks like a thicker than usual canvas. Our regular 10 oz. holds up very well, but we can accommodate a thicker canvas.

Screen Windows

How many windows would you like?

Add brass rings to your stake loops.


SKU: MARQ-GABLE Categories: , , , Tag:

Description

The design for this tent is derived from a known example of an 18th century German Officer’s tent. Although there are a few vague sketches from North America that show a tent that resembles this one in many ways, we have no documented evidence to tell us just how large the tent may have been. We have kept the correct proportions and offer this practical structure in a number of sizes.

The Gable End Marquee is an amalgamation of the best of both wall tents with it’s straight gable ends and marquees with the removable walls. The roof section can be erected alone for a canopied area or the walls hung between the interior and exterior valance. The “D” ring and snap hook wall suspension system allows the two doors to be located anywhere convenient. Details include full 34″ door panel overlap, mud flaps, and optional fancy trim valance.If you would like your Gable End Marquee to be manufactured with the13oz. Sunforger canvas add:20%.

Dimensions above are usual finished sizes. For those of you interested but intimidated by the longer ridge poles necessary, we offer pole sleeves of welded sheet metal to significantly reduce the length of your transportable load.

Unless otherwise noted, Tentsmith tents are made out of 10 oz. white Sunforger – mold and mildew resistant canvas.

All PRODUCTS ARE “CANVAS ONLY”. YOU WILL NEED POLES, ROPES, AND STAKES TO SET UP YOUR TENT, WHICH CAN BE PURCHASED SEPARATELY.

Additional information

Weight 1 oz
Dimensions 1 × 1 × 1 in
Size

8' 6" x 11' 3" x 9' – 6' Walls, 11' 3" x 11' 3" x 10' – 6' Walls, 11'3" x 14' x 10'9" – 6' Wall, 11'3" x 16'10" x 10'9" – 6' Wall, 11'3" x 19'8" x10'9" – 6' Wall, 14' x 14' x 10'9" – 6' Walls, 14' x 16'10" x 11'3" – 6' Wall, 14' x 19'8" x 11'3" – 6' Wall

Reviews

There are no reviews yet.

Be the first to review “Gable End Marquee”

Your email address will not be published. Required fields are marked *


Don't forget…